Participants

Total 390 presentations.
Presentation Title Presentation Type Country Status
FIRST PRINCIPLES CALCULATIONS OF STRUCTURAL, ELECTRONIC AND THERMODYNAMIC PROPERTIES OF BAs, BN, AlAs AND AlN COMPOUNDS
POSTER PRESENTATION Algeria Accepted
PHASE FORMATION PROCESS OF NANOCRYSTALLINE Fe-Cr ALLOYS PREPARED BY MECHANICAL ALLOYING
POSTER PRESENTATION Algeria Accepted
NUMERICAL ANALYSIS OF FREE VIBRATIONS OF LAMINATES PLATES BASED ON THE FIRST ORDER THEORY
ORAL PRESENTATION Algeria Accepted
NUMERICAL ANALYSIS OF FREE VIBRATIONS OF LAMINATES PLATES BASED ON THE FIRST ORDER THEORY
ORAL PRESENTATION Algeria Accepted
Pproduction of liquid fuels from natural gas
POSTER PRESENTATION Algeria Accepted
Removal of Cobalt and Lead from Aqueous Solutions onto Apricot Stone Activated Carbon (ASAC) - Error Analysis Method.
POSTER PRESENTATION Algeria Accepted
A PRACTICAL METHOD FOR THE DETERMINATION OF ECONOMIC INSULATION THICKNESS OF HOT WATER PIPES
ORAL PRESENTATION Turkey Accepted
EFFECT OF ADHESIVE TYPE ON FREE TRANSVERSE VIBRATION OF SINGLE LAP JOINT
ORAL PRESENTATION Turkey Accepted
AB INITIO STUDY OF THE STRUCTURAL, ELECTRONIC, AND THERMAL PROPERTIES OF ZnSxSe1-x MIXED CRYSTALS
POSTER PRESENTATION Algeria Accepted
MECHANICAL BOND IN INTERLOCKED MOLECULAR ARCHITECTURES
POSTER PRESENTATION Algeria Accepted
DOUBLE INSERTION OF THIOPHENE RINGS IN POLYYNEDIYL CHAINS TO STABILIZE NANOSCALED MOLECULAR WIRES
POSTER PRESENTATION Algeria Accepted
A COMPARATIVE EXPERIMENTAL STUDY OF THE THERMAL PERFORMANCE OF A BRAZED PLATE AND A DOUBLE PIPE HEAT EXCHANGER
ORAL PRESENTATION Turkey Accepted
RADIATIVE COOLING OF BUILDINGS BY USING SUSTAINABLE ROOF MATERIALS
ORAL PRESENTATION Turkey Accepted
NONLINEAR PCA FOR PROCESS MONITORING
POSTER PRESENTATION Turkey Accepted
Effect of pH on photo-catalytic efficiency in reduction of hexavalent chromium under visible light by TiO2 doped with bismuth and zinc.
POSTER PRESENTATION Algeria Accepted
Competitive removal of azo dyes by modified dolomite : performance and mechanism studies
POSTER PRESENTATION Turkey Under Review
Nanoindentation: simulation of the influence of the pores on the mechanical behavior of an elastoplastic material
POSTER PRESENTATION Algeria Accepted
Experimental Study of a New Solar Still
ORAL PRESENTATION Turkey Accepted
Influence of the building envelope and ventilation on indoor radon concentration: review of the measurement results in low-rise dwellings Kazakhstan.
ORAL PRESENTATION Kazakhstan Accepted
Passive Circuits Based On Substrate Integrated Waveguide In [4-6.5]GHz Band
ORAL PRESENTATION Algeria Accepted
Formulation and characterization of functional foods based on fruit
POSTER PRESENTATION Turkey Accepted
DEVELOPING A MOBILE FLOATING STRUCTURE AS AN OFFSHORE WIND ENERGY HARVESTING SYSTEM IN INDONESIA SEA AREAS
ORAL PRESENTATION Japan Accepted
EFFECT OF DURATION AND TEMPERATURE OF ANNEALING ON THE STRUCTURAL AND OPTICAL PROPERTIES OF WO3THIN FILMS.
POSTER PRESENTATION Algeria Accepted
RESEARCH ON THE HYDRODYNAMIC BEHAVIOUR AND POWER EXTRACTION PERFORMANCE OF A FLAPPING FOIL HYDROKINETIC TURBINE
VIRTUAL PRESENTATION Iran Accepted
Investigation of Cylindrical Cavity Receiver as a Heat Source of Solar ORC System Using Nanofluid
POSTER PRESENTATION Iran Accepted
CONTROL OF HUMAN ARM MOVEMENT
ORAL PRESENTATION Turkey Accepted
Thermal Evaluation of Cavity Receiver using Water/PG as the Solar Working Fluid
ORAL PRESENTATION Iran Accepted
PERFORMANCE TESTING AND BLADE DESIGN OF A SMALL WIND TURBINE FOR LOW WIND SPEED APPLICATION
POSTER PRESENTATION Algeria Accepted
Numerical Investigation of Dish Concentrator using a Cavity Receiver: Effect of Mass Flow Rate and Solar Irradiation
POSTER PRESENTATION Iran Accepted
FP-LAPW METHODOLGY BASED THEORETICAL INVESTIGATION OF STRUCTURAL, ELECTRONIC AND THERMAL PROPERTIES OF Zn1-xBexSe TERNARY ALLOYS
POSTER PRESENTATION Algeria Accepted
Structural and physical properties of intermetallic compounds Re3Pd2Sn2 (Re=Yb, Eu)
POSTER PRESENTATION Algeria Accepted
Effects of nitrogen flow rate on the structural and optical properties of tantalum nitride films grown by the DC magnetron sputtered technique
POSTER PRESENTATION Algeria Accepted
Energy and Exergy Analysis of a Stirling Cooling System with a Jet-Impingement Heat Exchanger
ORAL PRESENTATION USA (United States Of America) Accepted
Thermal evaluation of clay tiles as growth media in green roof applications
ORAL PRESENTATION USA (United States Of America) Accepted
LATTICE BOLTZMANN SIMULTION OF NATURAL CONVECTION IN A PARTIALLY HEATED AND INCLINED ENCOSURE
ORAL PRESENTATION Morocco Accepted
Undrained vertical bearing capacity factors for circular shallow foundations
ORAL PRESENTATION Algeria Accepted
Investigation of composite materials strength in terms of various parameters
ORAL PRESENTATION Turkey Accepted
Stress Analysis of Bracketed Ended Girder Under External Force
ORAL PRESENTATION Turkey Accepted
Fire and Explosion risks analysis in the natural gas liquefaction complex GL1K-Skikda
Fire and Explosion risks analysis in the natural gas liquefaction complex GL1K-Skikda
POSTER PRESENTATION Algeria Accepted
Fire and Explosion risks analysis in the natural gas liquefaction complex GL1K-Skikda
Fire and Explosion risks analysis in the natural gas liquefaction complex GL1K-Skikda
POSTER PRESENTATION Algeria Accepted
Study of reliability of pipeline rehabilitated by composite materials by using FORM Method
POSTER PRESENTATION Algeria Accepted
The light scattering by transmission and reflection study on a sandblasted glass
POSTER PRESENTATION Algeria Accepted
THE COMBINATION OF DEHUMIDIFIER AND ELECTRI AIR HEATER: PERFORMANCE COMPARISON OF R-134A, R-152A, AND R-407C
ORAL PRESENTATION Indonesia Accepted
behavior of the mechanical strength of silico soda-lime glass under chemical treatment in microscratching
POSTER PRESENTATION Algeria Accepted
INVESTIGATION OF A NEW CONTROL APPLICATION FOR HEAVING TYPE WAVE ENERGY CONVERTER
ORAL PRESENTATION Turkey Accepted
Comparative maximum power density analysis of a supercritical CO2 (s-CO2) Brayton power cycle
ORAL PRESENTATION Turkey Accepted
EFFECT OF TEMPERATURE AND PRESSURE ON THE ENERGY GAP OF GaInP
POSTER PRESENTATION Algeria Accepted
THEORETICAL AND EXPERIMENTAL COMPARISON OF SELECTIVE LASER MELTED IMPLANT SAMPLES WITH UNIFORM AND GRADUALLY SCAFFOLD MORPHOLOGY IN TERMS OF LOOSENING
POSTER PRESENTATION Turkey Accepted
3D PRINTER FILAMENT COMPARISON WITH THE PURPOSE OF PRINTING A VIRTUAL REALITY GLASS
ORAL PRESENTATION Turkey Accepted
Exergetic and Ecological Performance Analysis and Optimization of Brayton Cycle via Mean Cycle Pressure Criterion (MCP)
ORAL PRESENTATION Turkey Accepted
Mechanical and thermal properties of alginate films
POSTER PRESENTATION Turkey Accepted
Design, Produce and Control of a 2DOF Upper Limb Exoskeletal Robot
ORAL PRESENTATION Turkey Accepted
MODULE AND BATTERY PERFORMANCES COMPARISON OF A PHOTOVOLTAIK SYSTEM FOR SMALL SCALE SYSTEM
POSTER PRESENTATION Indonesia Accepted
Elaboration and characterization of a cellular glass based of wasted glass
Elaboration and characterization of a cellular glass based of wasted glass
POSTER PRESENTATION Algeria Accepted
Elaboration and characterization of a cellular glass based of wasted glass
Elaboration and characterization of a cellular glass based of wasted glass
POSTER PRESENTATION Algeria Accepted
EFFECTS OF INLET AIR TEMPERATURE ON PERFORMANCE AND EMISSIONS OF A TURBOCHARGED DIESEL ENGINE
ORAL PRESENTATION Turkey Accepted
ELECTRICAL DISCHARGE MACHINING OF INCONEL ALLOYS
ORAL PRESENTATION Turkey Accepted
INFLUENCE OF WIRE ELECTRICAL DISCHARGE MACHINING PARAMETERS ON WHITE LAYER FORMATION
ORAL PRESENTATION Turkey Accepted
CHEMICAL MACHINING OF STAINLESS STEELS
ORAL PRESENTATION Turkey Accepted
Effect of Si on magnetic properties of Fe-Si-Al sendust arc-melted alloys
ORAL PRESENTATION Algeria Accepted
Analysis of circular plate bending with a quadrilateral strain based finite element
ORAL PRESENTATION Algeria Accepted
DENSITY FUNCTIONAL THEORY CALCULATIONS OF STRUCTURAL, ELECTRONIC AND MECANICAL PROPERTIES OF RARE EARTH MATERIALS
POSTER PRESENTATION Algeria Accepted
EFFECT OF RIBBED SURFACE ON HEAT TRANSFER ON TURBULENT FLOW OVER A FLAT PLATE
ORAL PRESENTATION Turkey Accepted
DIFFERENT ALKALINE SOLUTION’S EFFECTS ON THE GEOPOLYMERIZATION OF GOLD MINE TAILINGS
ORAL PRESENTATION Turkey Accepted
EFFECTS OF NANO-CuO ON THE MICROSTRUCTRAL PROPERTIES OF INSDUSTRIAL WASTE CONTAINING MORTARS
POSTER PRESENTATION Turkey Accepted
Effects of Liquid Nitrogen Addition to Intake Air on the Performance and NO Formation of an SI Engine with Different Fuels
ORAL PRESENTATION Turkey Accepted
CHARACTERIZATION OF GEOPOLYMERS SYNTHESIZED BY GOLD MINE TAILINGS AND INVESTIGATION EFFECTS OF ADDITIONAL ALUMINA
ORAL PRESENTATION Turkey Accepted
PROPERTIES OF CEMENT MORTAR INCORPORATING NANO-CuO AND INDUSTRIAL WASTES
ORAL PRESENTATION Turkey Accepted
GROUNDED INDUCTANCE SIMULATOR REALIZATION BY USING CURRENT FEEDBACK OPERATIONAL AMPLIFIER AND ITS FILTER APPLICATION
ORAL PRESENTATION Turkey Accepted
First-Principle Calculations of Structural, Elastic, and Electronic Properties of Intermetallic Rare Earth R2Ni2Pb (R = Ho, Lu, and Sm) Compounds
POSTER PRESENTATION Algeria Accepted
Heat Transfer and Pressure Drop Characteristics of SiO2-Water Nanofluid in a Circular Microchannel
ORAL PRESENTATION Turkey Accepted
DETERMINATION OF FORCED CONVECTIVE HEAT TRANSFER IN A RECTANGULAR CHANNEL EQUIPPED WITH LATTICE STRUCTURES
ORAL PRESENTATION Turkey Accepted
THE MECHANICAL PROPERTIES OF DIFFERENT CELLULAR LATTICE STURUCTURES MANUFACTURED BY SELECTIVE LASER MELTING: EXPERIMENTS AND FINITE ELEMENT ANALYSIS
ORAL PRESENTATION Turkey Accepted
INVESTIGATION OF MULBERRY LEAF POWDER AS A CARBONIZATION AGENT IN INTUMESCENT FLAME RETARDANT SYSTEM BY USING CONE CALORIMETER TESTS
ORAL PRESENTATION Turkey Accepted
Algeria Accepted
THE EFFECTS OF BUILD ANGLE AND HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL BEHAVIORS OF SELECTIVE LASER MELTED Ti-6Al-4V ALLOY
POSTER PRESENTATION Turkey Accepted
EXPERIMENTAL INVESTIGATION OF GROUND COUPLED HEAT EXCHANGER
ORAL PRESENTATION Pakistan Accepted
MANUFACTURING EXPERIMANTAL SET UP FOR HEAT TRANSFER ENHANCEMENT IN SINUSOIDAL CHANNEL
ORAL PRESENTATION Turkey Accepted
STRUCTURAL AND OPTICAL PROPRETIES OF NICKEL OXIDES THIN FILMS PREPARED BY SPRAY PYROLYSIS METHOD
STRUCTURAL AND OPTICAL PROPRETIES OF NICKEL OXIDES THIN FILMS PREPARED BY SPRAY PYROLYSIS METHOD
POSTER PRESENTATION Algeria Accepted
STRUCTURAL AND OPTICAL PROPRETIES OF NICKEL OXIDES THIN FILMS PREPARED BY SPRAY PYROLYSIS METHOD
STRUCTURAL AND OPTICAL PROPRETIES OF NICKEL OXIDES THIN FILMS PREPARED BY SPRAY PYROLYSIS METHOD
POSTER PRESENTATION Algeria Accepted
Theoretical and experimental comparison of selective laser melted implant samples with uniform and gradually scaffold morphology in terms of loosening
Turkey Accepted
NUMERICAL SIMULATION OF DEFOGGING IN MICRO-WIRE EMBEDDED BUS WINDSHIELD
ORAL PRESENTATION Turkey Accepted
FORCED CONVECTION IN ONE SIDE WAVY CHANNEL
ORAL PRESENTATION Turkey Accepted
Importance of Power Factor on Defining Energy Conversion Efficiency of CoFeCrAs Alloy in Thermoelectric Material Research
POSTER PRESENTATION Turkey Accepted
A CYBERNETIC APPROACH TO THE PROBLEM OF A FREE SURFACE FLOW .
POSTER PRESENTATION Algeria Accepted
METROLOGICAL EVALUATION OF THE EFFECT OF TEMPERATURE PARAMETER CHANGES ON MECHANICAL PROPERTIES OF COPPER PIPE IN BRAZING PROCESS
POSTER PRESENTATION Turkey Accepted
Optimal selection of star camera parameters using computer simulation
POSTER PRESENTATION Algeria Accepted
Experimental Study on Regain Hardness loss of AA-7075-T6 welded by Friction Stir Welding using Post Weld Heat Treatment Method
Turkey Accepted
EXPERIMENTAL INVESTIGATION ON FIRE CHARACTERISTICS OF CARBON FIBER REINFORCED RIGID POLYURETHANE FOAM BY USING A CONE CALORIMETER
ORAL PRESENTATION Turkey Accepted
Investigation of wear properties of TiB2/Al functional graded composites
ORAL PRESENTATION Turkey Accepted
Material Prediction for Heat Management by Computational Method: The Evaluation of CoFeMnSi Half-Metallic Ferromagnet
POSTER PRESENTATION Turkey Accepted
Production and Wear Properties of Functionally Graded Al₃Ti/Al-Cu Composite by Centrifugal Casting
ORAL PRESENTATION Turkey Accepted
TWIST-BEND INSTABILITY OF A CANTILEVER BEAM SUBJECTED TO AN END LOAD VIA ADM AND VIM
ORAL PRESENTATION Turkey Accepted
Investigation of Thermoelectric Properties of FeVTiAl Heusler Alloy for Sustainable Energy Research
POSTER PRESENTATION Turkey Accepted
SOME ANALYTICAL APPROXIMATE METHODS FOR TORSIONAL VIBRATIONS AND STABILITY OF THIN-WALLED BEAMS ON ELASTIC FOUNDATION
ORAL PRESENTATION Turkey Accepted
Energy Regeneration via vehicle braking system, “Inertial approach”.
ORAL PRESENTATION Pakistan Accepted
Prototyping of Wind Turbine using Matlab/Simulink approach.
ORAL PRESENTATION Pakistan Accepted
Review of indoor radon, air-tightness, air ventilation: results in Kazakhstan
ORAL PRESENTATION Kazakhstan Accepted
Risk Management in the Automotive Industry
ORAL PRESENTATION Bulgaria Accepted
EFFECT OF DIFFERENT DRYING METHODS ON DRYING CHARACTERISTICS AND QUALITY PARAMETERS OF JUJUBE FRUITS
ORAL PRESENTATION Turkey Accepted
ANALYSIS OF THE CORROSION DEFECTS GROWTH IN OIL AND GAS PIPELINES BASED ON THE MARKOV PROCESS
POSTER PRESENTATION Turkey Accepted
IN-SITU TEMPERATURE MEASUREMENT TECHNIQUES FOR ADDITIVE MANUFACTURING
Turkey Accepted
Algeria Accepted
Characterization of bismuth trioxide thin films prepared through the spray pyrolysis method: annealing effect
POSTER PRESENTATION Algeria Accepted
Optimization based on response surface methodology and sensitivity analysis of swirl generators for non-decaying flow
ORAL PRESENTATION Turkey Accepted
Experimental investigation of the effect of different jet numbers on heat transfer
ORAL PRESENTATION Turkey Accepted
Effect of Thermosonication Process on Quality Parameters of Apple Juice During Shelf Life
ORAL PRESENTATION Turkey Accepted
PRODUCTION AND CHARACTERIZATION of THE SiCp/Al-7075 COMPOSITES TOWARDS USING IN THE OTOMOTIVE PARTS WİTH THE CASTING METHOD
POSTER PRESENTATION Turkey Accepted
OPTIMIZATION ANALYSIS OF II-O-VI HIGHLY MISMATCHED ALLOYS BASED THIN FILM SOLAR CELL
ORAL PRESENTATION Turkey Accepted
RECENT DEVELOPMENTS IN ELECTRIC VEHICLES
ORAL PRESENTATION Turkey Accepted
Cracks detection of helical gears using Ensemble Empirical Mode Decomposition (EEMD) and statistical descriptors.
POSTER PRESENTATION Algeria Accepted
Ab-initio CALCULATION OF ELECTRONIC, MAGNETIC AND OPTICAL PROPERTIES OF TERNARY ALLOYS Ni3Mn1-xAlx
POSTER PRESENTATION Algeria Accepted
Applications of microfluidic systems in low debit drug delivery
ORAL PRESENTATION Iran Accepted
THE STRESS ANALYSIS ON TWO DIFFERENT ADHESIVELY BONDED T-JOINTS WITH EMBEDDED SUPPORTS VIA 3D NONLINEAR FINITE ELEMENT METHOD
ORAL PRESENTATION Turkey Accepted
Mathematical of heat and mass transfer during convective drying of cellular concrete
POSTER PRESENTATION Algeria Accepted
EFFECT OF HYDROXYPROPYL-Β-CYCLODEXTRIN ON HYDROXAYAPATITE CRYSTALLIZATION
POSTER PRESENTATION Turkey Accepted
ECONOMIC ANALYSIS OF THE HEAT RECOVERY EQUIPMENT IN THE AIR CONDITIONING SYSTEM OF A HOTEL BUILDING DURING WINTER AND SUMMER SEASON
POSTER PRESENTATION Turkey Accepted
INVESTIGATING THE EFFECTS OF THE CORNER ANGLE ON THE EQUAL CHANNEL ANGULAR PRESSING PROCESS
ORAL PRESENTATION Turkey Accepted
INVESTIGATION OF THE PERFORMANCE OF ALTERNATIVE REFRIGERANTS COMPARED TO THE R134A REFRIGERANT
POSTER PRESENTATION Turkey Accepted
INVESTIGATION ON EFFECT OF ARTIFICIAL AGING ON MECHANICAL AND OPTICAL PROPERTIES OF ACRYLIC COATINGS
ORAL PRESENTATION Algeria Accepted
CONSIDERATION OF ONE BURNER PARALLEL FLOW INJECTION IN SHAFT KILNS USING POROUS MEDIA MODEL(P.M.M.)
POSTER PRESENTATION Germany Accepted
SELECTION OF THE MOST SUITABLE TRUSS TYPE AMONG TRUSS SYSTEMS BY USING AN ITERATIVE METHOD
ORAL PRESENTATION Turkey Accepted
TUNING PID CONTROLLER USING GENETIC ALGORITHM AND PARTICLE SWARM OPTIMIZATION ALGORITHM FOR SINGLE PROPELLER PENDULUM
ORAL PRESENTATION Turkey Accepted
THE INDOOR AIR QUALITY ON A PUBLIC TRANSPORT VEHICLE ON METROBUS LINE
Turkey Accepted
EFFECTS OF TEMPERATURE CHANGES ON THE DYNAMIC PARAMETERS OF A STRUCTURE
ORAL PRESENTATION Turkey Accepted
PHASE IDENTIFICATIONS OF Si3N4-INCONEL 718 JOINTS
POSTER PRESENTATION Turkey Accepted
Air flow network modeling of a simple house in energy plus
ORAL PRESENTATION Iran Accepted
REACTION PRODUCTS ANALYSIS AND THERMODYNAMIC STUDY OF THE SİALON-TITANIUM JOINTS
ORAL PRESENTATION Turkey Accepted
AN INVESTIGATION ON ABRASIVE WEAR BEHAVIOR OF FILLED POLYTETRAFLUROETHYLENE
ORAL PRESENTATION Turkey Accepted
THE DESIGN AND MANUFACTURING OF INDUSTRIAL DISSOLVER MACHINE
ORAL PRESENTATION Turkey Accepted
THE EFFECTS OF REPEATED TEMPERING HEAT TREATMENT ON THE WEAR PROPERTIES OF COMPACTED GRAPHITE IRON
ORAL PRESENTATION Turkey Accepted
EXPERIMENTAL THRUST FORCE MEASUREMENT SYSTEM DESIGN FOR SMALL PROPELLER
ORAL PRESENTATION Turkey Accepted
CFD ANALYSES AND TAGUCGI OPTIMIZATION OF DIFFUSER FOR A SMALL-TYPE WIND TURBINE
ORAL PRESENTATION Turkey Accepted
SYNTHESIS AND CHARACTERIZATION OF MESOPOROUS CARBON CMK-3
POSTER PRESENTATION Turkey Accepted
The effect of temperature on the output characteristics of ballistic carbon nanotube field effect transistor (CNTFET)
POSTER PRESENTATION Algeria Accepted
MODELING OF AIR CONDITIONING SYSTEM USING R407C REFRIGERANT GAS IN RAILWAY VEHICLES
POSTER PRESENTATION Turkey Accepted
Improvement On Rear Interior Panel For Ford Commercial Vehicles
ORAL PRESENTATION Turkey Accepted
THE EFFECT OF ADDITIVES ON RHEOLOGICAL PROPERTIES OF ALGINATE/κ-CARRAGEENAN GELS
POSTER PRESENTATION Turkey Accepted
Experimental study of using MgO nanoparticles in two different base fluids in a solar parabolic trough collector
POSTER PRESENTATION Iran Accepted
OPTIMIZATION OF COOLING PERFORMANCE OF A MICRO HEAT EXCHANGER USING ARTIFICIAL NEURAL NETWORK
ORAL PRESENTATION Turkey Accepted
EXPERIMENTAL STUDY OF HORIZONTAL GROUND SOURCE HEAT EXCHANGER SYSTEM
ORAL PRESENTATION Turkey Accepted
ENGINEERING ANALYSIS OF AN ORGANIC RANKINE CYCLE (ORC) SYSTEM DESIGN
ORAL PRESENTATION Turkey Accepted
THE EFFECT OF ELECTRIC CURRENT ON THE FRICTION AND THE WEAR BEHAVIOR OF THE BRASS-STEEL TRIBOCONTACT
POSTER PRESENTATION Algeria Accepted
Modal Stress Analysis of Bonded Single Lap Joints under Compression
VIRTUAL PRESENTATION Turkey Accepted
Synthesis of a new composite material carbon / polymer / MnO2: Application in electrochemical generators.
POSTER PRESENTATION Algeria Accepted
NUMERICAL AND ANALYTICAL ANALYSIS OF POINT CONTACT
ORAL PRESENTATION Turkey Accepted
Nanostructures based zinc oxyde prepared by linear polarization of zinc.
POSTER PRESENTATION Algeria Accepted
PARAMETERIZED PROGRAMMING OF A NUMERICAL CONTROLED MACHINE
POSTER PRESENTATION Algeria Accepted
Statistical study of the influence of sanding defects on the behavior of the mechanical resistance of soda-lime glass
POSTER PRESENTATION Algeria Accepted
A NUMERICAL STUDY: UNSTEADY FLOW PROPAGATION USING WITH TWO DIFFERENT METHODS
ORAL PRESENTATION Turkey Accepted
RENEWABLE ENERGY POTENTIAL OF TURKEY
POSTER PRESENTATION Turkey Accepted
STRUCTURAL AND MAGNETIC PROPERTIES OF IRON IN Bi2212 CERAMICS
POSTER PRESENTATION Algeria Accepted
PERFORMANCE ASSESSMENT OF AN ELECTRICITY PRODUCTION SYSTEM
ORAL PRESENTATION Turkey Accepted
IMPROVEMENT OF SUPERCONDUCTING PROPERTIES IN Pb-DOPED Bi2Sr2CaCu2O8+ SUPERCONDUCTOR
IMPROVEMENT OF SUPERCONDUCTING PROPERTIES IN Pb-DOPED Bi2Sr2CaCu2O8+ SUPERCONDUCTOR
POSTER PRESENTATION Algeria Accepted
IMPROVEMENT OF SUPERCONDUCTING PROPERTIES IN Pb-DOPED Bi2Sr2CaCu2O8+ SUPERCONDUCTOR
IMPROVEMENT OF SUPERCONDUCTING PROPERTIES IN Pb-DOPED Bi2Sr2CaCu2O8+ SUPERCONDUCTOR
POSTER PRESENTATION Algeria Accepted
ANALYSIS OF BEAMS ON ELASTIC FOUNDATION USING ARTIFICAL LYAPUNOV PARAMETER
ORAL PRESENTATION Turkey Accepted
Synthesis of tin sulphide thin films using different precursor solutions
POSTER PRESENTATION Algeria Accepted
Effects of arsenic doping and measurement temperature on the electrical conduction of polycrystalline silicon thin films
POSTER PRESENTATION Algeria Accepted
Study the thermomechanical behavior of a material by stochastic methods
POSTER PRESENTATION Turkey Accepted
DESIGN AND PROPERTIES OF NEW D-XYLOSE-BASED BIOSURFACTANT
POSTER PRESENTATION Turkey Accepted
Investigation on optical properties and erosive behavior of silica sol gel coationgs
POSTER PRESENTATION Algeria Accepted
MULTIAXIAL FATIGUE ANALYSIS OF A PLASTICALLY DEFORMED HOOK USING CRITICAL PLANE THEORY
ORAL PRESENTATION Turkey Accepted
EFFECTS OF THERMAL BARRIER COATING (TBC) THICKNESS ON TEMPERATURE DISTRIBUTION OF GAS TURBINE BLADE
ORAL PRESENTATION Iran Accepted
Determination of the series resistance and the ideality factor of Solar cells by genetic Algorithms in noisy environement
POSTER PRESENTATION Algeria Accepted
CRASH ANALYSIS OF REAR UNDER-RUN PROTECTION DEVICE BY FINITE ELEMENT METHOD
ORAL PRESENTATION Turkey Accepted
A STUDY ON ENDEMIC PLANTS USED FOR BIOENERGY IN TURKEY
POSTER PRESENTATION Turkey Accepted
THE EVALUATION OF BIOMASS CONVERTION PROCESSING ON ORGANIC RESIDUES FOR BIOENERGY
POSTER PRESENTATION Turkey Accepted
A STUDY ON PALLET MECHANİSM DAMAGE OF CHAIN CONVEYOR
ORAL PRESENTATION Turkey Accepted
SIMULATION OF BIOMASS GASIFICATION PROCESS INTEGRATED WITH A SOLID OXIDE FUEL CELL AND BASED ON THE OUTLET OF TORREFACTION PROCESS AS FEEDSTOCK
POSTER PRESENTATION Iran Accepted
Robust and stable implicit time scheme for the Nonlinear Dynamics analysis of beam like structures
ORAL PRESENTATION Algeria Accepted
Influence of shape chicanes in the absorber on the generation of turbulence
POSTER PRESENTATION Turkey Accepted
Influence of Ag inclusion on the mechanical properties of Ag/Cu nanocomposite by indentation
POSTER PRESENTATION Algeria Accepted
Analytical and Computer Aided Positioning, Velocity and Acceleration Analyses of Hinge Mechanism of Large Vehicle Tailgates
ORAL PRESENTATION Turkey Accepted
INVESTIGATION DYNAMIC BEHAVIORS OF CRANE BEAMS UNDER MOVING LOADS
ORAL PRESENTATION Turkey Accepted
A COMPARISONAL STUDY ON FEATURES OF PREDICTIVE MAINTENANCE RESPECT TO COUPLING VARIATIONS
ORAL PRESENTATION Turkey Accepted
CONDITION MONITORING APPROACH ON RESONANCE PROBLEM RESPECT TO BELT DRIVEN EQUIPMENT
ORAL PRESENTATION Turkey Accepted
Air Curtain Optimization on Refrigerated Display Case (Multideck) and Energy Saving by Changing Design Parameters
POSTER PRESENTATION Turkey Accepted
OPTOELECTRONIC INVESTIGATION OF SPIN COATED ZINC OXIDE THIN FILMS: A THEORETICAL, EXPERIMENTAL AND COMPUTATIONAL APPROACH
ORAL PRESENTATION Turkey Accepted
DETERMINATION OF THE WASTE HEAT RECOVERY POTENTIAL FOR A BULK CARRIER SHIP’S DIESEL GENERATOR
ORAL PRESENTATION Turkey Accepted
Importance cleaning of PV Modules for Grid-Connected PV Systems in a desert environment
POSTER PRESENTATION Algeria Accepted
Development of a New Algorithm for Sizing of Winged and Wingless Heat Exchangers
ORAL PRESENTATION Turkey Accepted
A SURVEY OF SIPM READOUT ASIC FOR NEAR INFRARED ATMOSPHERIC MEASUREMENT USING NANO-SATELLITES
POSTER PRESENTATION Algeria Accepted
Optical fiber sensor for monitoring the water quality
POSTER PRESENTATION Algeria Accepted
The finite element approximation of evolutionary Hamilton–Jacobi–Bellman equations
POSTER PRESENTATION Algeria Accepted
Characterization of a sintered Fe + 1% C + 2% Ti.
POSTER PRESENTATION Algeria Accepted
Effect of manganese, nickel, molybdenum and vanadiamun Of mechanical behavior of austempered ductile iron
POSTER PRESENTATION Algeria Accepted
PERFORMANCE EVOLUTION OF A 10.5 KW PHOTOVOLTAIC STATION CONNECTED TO ELECTRICAL NETWORK IN THE SOUTH OF ALGERIA
POSTER PRESENTATION Algeria Accepted
Eelectrochemical and Friction Behavior of TiNi Alloy in Physiological Solution.
POSTER PRESENTATION Algeria Accepted
Experimental Investigation of High Pressure Water Injection on the Engine Performance and Exhaust Emissions of a LPG Fuelled SI Engine
ORAL PRESENTATION Turkey Accepted
FRICTION BEHAVIOURS OF LUBRICATION OIL CONTAMINATED WITH COOLING WATER IN MARINE DIESEL ENGINES
ORAL PRESENTATION Turkey Accepted
THE STRESS ANALYSIS ON TWO DIFFERENT ADHESIVELY BONDED T-JOINTS VIA 3D NONLINEAR FINITE ELEMENT METHOD
ORAL PRESENTATION Turkey Accepted
TEM Characterization and Thermodynamic Analysis of the Interfaces Formed at the Heat Treated Si3N4-Titanium Joints
ORAL PRESENTATION Turkey Accepted
Nanoindentation: simulation of the influence of the pores on the mechanical behavior of an elastoplastic material
POSTER PRESENTATION Algeria Accepted
ANALYSIS OF THE FRICTION FORCES BETWEEN PISTON RING-CYLINDER LINER PAIRS ON MARINE DIESEL ENGINES USING EMULSIFIED FUEL
ORAL PRESENTATION Turkey Accepted
FORMATION OF INSULATING POLYURETHANE FOAM IN A REACTING MOLD FLOW
ORAL PRESENTATION Turkey Accepted
Mathematical modelling of okra samples by different drying methods
ORAL PRESENTATION Turkey Accepted
A comparative study of nanostructures Chiral Photonic Crystal 2D connected and disconnected in terahertz (THz)
POSTER PRESENTATION Turkey Accepted
ANODIC OXIDATION OF BULK NIOBIUM IN H2SO4 AND NaCl SOLUTIONS
ORAL PRESENTATION Turkey Accepted
Effect of Lubrication on the Tribological Behavior of a Supermartensitic Stainless Steel 13Cr5Ni2Mo
POSTER PRESENTATION Algeria Accepted
MODELING OF THE ELASTIC BEHAVIOR OF HEXAGONAL HONEYCOMB CORE
POSTER PRESENTATION Algeria Accepted
Diagnosis and prediction of the global state of a mechanical system rotating by the method of neural networks
POSTER PRESENTATION Algeria Accepted
Dynamic of magnetization in the Super-Paramagnetic Nanoparticles: Effect of a DC Oblique field
POSTER PRESENTATION Turkey Accepted
Ultimate bearing capacity for two interfering strip footings on clay with linear increase of cohesion with depth
POSTER PRESENTATION Algeria Accepted
Thermal Design of an Industrial Condenser preceded by a Desuperheater
POSTER PRESENTATION Turkey Accepted
Numerical study of the vertical uplift capacity for embedded circular anchors
POSTER PRESENTATION Algeria Accepted
MICROMECHANICAL BEHAVIOR OF ETHYLENE/PROPYLENE FILM BY AFM
POSTER PRESENTATION Turkey Accepted
Investigation of Yaw Motion-Speed Relationship of High Speed Train Set, by Dynamic Analysis Method
ORAL PRESENTATION Turkey Accepted
Mechanical and Physical study of bio nanomaterial NiCr obtained by mechanical alloying
POSTER PRESENTATION Algeria Accepted
Novel dimethylglyoxime complexes with Ni(III), Ni(IV): synthesis, Spectroscopic, DFT characterization.
POSTER PRESENTATION Algeria Accepted
New Materials in Hydrothermal Synthesis
POSTER PRESENTATION Accepted
New materiels for Optical Data Storage.
POSTER PRESENTATION Accepted
Theoretical study of the mode of coordination chelating ligands in the lanthanides
POSTER PRESENTATION Algeria Accepted
REGRESSION MATHEMATICAL MODEL APPLICATION BY “R” SOFTWARE IN DETERMINATION OF VEHICLE VELOCITY FOR TRUCK DEPEND ON THROW PEDESTRIAN DISTANCE
POSTER PRESENTATION Turkey Accepted
Study the effect of addition brass to aluminum alloy.
ORAL PRESENTATION Jordan Accepted
Mathematical Modeling of Heat Transfer for Polymer Electrolyte Membrane fuel cells (PEMFCs)
ORAL PRESENTATION Jordan Accepted
Preparation and Characterization of Wound Dressing Biocomposite Film based on Chitosan and Gelatin
POSTER PRESENTATION Turkey Accepted
EFFECT OF THE ADDITION OF THE NICKEL ON THE WEAR AND WORK HARDENING PROPERTIES OF MANGANESE AUSTENITIC STEEL
POSTER PRESENTATION Algeria Accepted
INFLUENCE OF PIPE MATERIAL ON UNSTEADY FLOW IN THE PRESENCE OF A LEAK
POSTER PRESENTATION Algeria Accepted
Tribological characterization of hot dip galvanized steel
POSTER PRESENTATION Algeria Accepted
Corrosion Resistance of Austenitic Stainless Steel in 0.5M H2SO4
POSTER PRESENTATION Turkey Accepted
Optimal vibration control of conical shells: The influence of several shapes of collocated piezoelectric Sensor/Actuator pairs on the vibration control effectiveness.
ORAL PRESENTATION Morocco Accepted
Synthis and caracterisation of the copolymerization of MMA and THF with a green catalyst
POSTER PRESENTATION Algeria Accepted
Analysis of buckling and failure modes in honeycomb sandwiches panels subjected to static and dynamic loading conditions using ct images methods.
POSTER PRESENTATION Algeria Accepted
EFFECT OF CHEMICAL COMPOSITION AND HEAT TREATMENT ON THE DEGRADATION OF MANGANESE STEELS
POSTER PRESENTATION Algeria Accepted
Passivation and corrosion behaviours of AISI 316L stainless steel as implant materials in simulated blood environment
POSTER PRESENTATION Algeria Accepted
STRUCTURAL STUDY BY COMBINED IR SPECTROSCOPY AND AB INITIO METHODS, AND THE NBO ANALYSIS PROPERTIES OF THE TETRODOXIN
POSTER PRESENTATION Algeria Accepted
Experimental investigation of energy consumption for a hydraulic system driven by fixed and variable speed
ORAL PRESENTATION Turkey Accepted
an optimal balance between diversification and intensification for variances of the genetic algorithm for the improvement of the performances of flexible manufacturing systems
POSTER PRESENTATION Turkey Accepted
Minimizing Makespan on Identical Parallel Machine Scheduling
POSTER PRESENTATION Turkey Accepted
NUMERICAL SIMULATION OF A TURBULENT FLOW AROUND AN OBSTACLE WITH SLOPING SIDES
POSTER PRESENTATION Algeria Accepted
Comparative study of the RRO for two Lanthanum Nickelate materials La1,98Sr 0,02Ni 0,99 Co 0,01O4±δ (LSNC001)and La1,95 Sr 0,05Ni 0,95 Co 0,05O4±δ (LSNC005)
POSTER PRESENTATION Algeria Accepted
Oxygen Reduction Reaction at low temperatures on La2NiO4 ± δ and La2CoO4 ± δ as cathode materials for Zinc-Air batteries
POSTER PRESENTATION Algeria Accepted
Characterizing the Performance of the Mass Flow Conditioner in Automotive Application
ORAL PRESENTATION Turkey Accepted
DRYING CHARACTERISTICS INVESTIGATION OF BLACK MULBERRY DRIED BY INFRARED METHOD
ORAL PRESENTATION Turkey Accepted
Effect of manganese, nickel, molybden and vanadium of mechanical behavior of austempered ductile iron.
POSTER PRESENTATION Algeria Accepted
First-principles investigation of the electronic and magnetic properties of Ca-doped PrMnO3
Algeria Accepted
First-principles investigation of the electronic and magnetic properties of Ca-doped PrMnO3
POSTER PRESENTATION Algeria Accepted
ROAD FRICTION IMPACT IN TECHNICAL PROCESS OF VEHICLE-PEDESTRIAN CRASH AND PEDESTRIAN THROWING
POSTER PRESENTATION Turkey Accepted
Investigation the effects of sintering temperatures on the microstructure and mechanical properties of sintered WC-reinforced iron based composites
POSTER PRESENTATION Algeria Accepted
SUPPORTED NANO GOLD CATALYZED THREE-COMPONENT COUPLING REACTIONS OF ETHYL ACETOACETATE, HYDROXYLAMINE HYDROCHLORIDE AND AROMATIC ALDEHYDES
POSTER PRESENTATION Algeria Accepted
A review of energy management in industry
ORAL PRESENTATION Turkey Accepted
APPLICATION OF FLUIDIZED BED BOILER ENERGY ECONOMICS
ORAL PRESENTATION Turkey Accepted
ON THE STRUCTURAL AND ELECTRONIC PROPERTIES OF SOME PEROVSKITE MATERIALS
POSTER PRESENTATION Turkey Accepted
Highly Photocatalytic activity of calcined anionic clay on the degradation of a cationic dye under UV and natural solar.
POSTER PRESENTATION Algeria Accepted
The synthesis of polystyrene with a new chemical approach
POSTER PRESENTATION Algeria Accepted
Supported gold nanocatalysts for adipic acid production
ORAL PRESENTATION Turkey Accepted
Compact Mixer Design for Heavy Duty SCR Application
ORAL PRESENTATION Turkey Accepted
MIXED CONVECTION IN A SINGLE-WALLED CARBON NANOTUBE-WATER NANOFLUID FILLED PARTIALLY HEATED TRIANGULAR LID-DRIVEN CAVITY HAVING AN ELASTIC BOTTOM WALL
ORAL PRESENTATION Turkey Accepted
Structural, electronic and thermal properties of AlxGa1−xAs ternary alloys under temperature
POSTER PRESENTATION Algeria Accepted
Temperature induced structural, electronic and thermal properties of AlPxAs1-x ternary alloys
POSTER PRESENTATION Algeria Accepted
EFFECTS OF THE DISTANCE OF COOKER FROM A DOMESTIC BURNER WITH CRESCENT FLAME CHANNELS AND THE COOKER DIAMETER ON TEMPERATURE DISTRIBUTION AND THERMAL EFFICIENCY
ORAL PRESENTATION Turkey Accepted
INVESTIGATION OF CREEP RESISTANCE OF A GAS FUELED GRILL BURNER WITH DIFFERENT MATERIALS AND SHELL THICKNESSES
ORAL PRESENTATION Turkey Accepted
INVESTIGATION OF THE EFFECTS OF GEOMETRIC ADJUSTMENTS AND DIFFERENT FUELS ON EFFICIENCY AND EMISSIONS OF A CONVENTIONAL INDUSTRIAL BURNER
ORAL PRESENTATION Turkey Accepted
Analytical study of three-point bending test of honeycomb sandwich panels
POSTER PRESENTATION Algeria Accepted
Characterization of a new composite material by impedance spectroscopy
POSTER PRESENTATION Algeria Accepted
CHIRAL RESOLUTION OF SEVERAL FLAVANONES USING NANO-LIQUID CHROMATOGRAPHY
POSTER PRESENTATION Algeria Accepted
Structural and Magnetic Properties of Nanocrystalline Co30Ni70 Alloy prepared by Mechanical Alloying
POSTER PRESENTATION Algeria Accepted
Comparison of some control schemes applied on mobile robots
POSTER PRESENTATION Turkey Accepted
CALCULATION OF MAGNETIC PROPERTIES OF TETRAGONALE BaTi1-xM xO3- ; M= (Fe, Co, Cr, Mn)
POSTER PRESENTATION Algeria Accepted
Structural and Mechanical Characterization of Al-30wt%Ni Alloys Elaborated by the HF-Fusion Process
POSTER PRESENTATION Algeria Accepted
Condensed method for solid mechanical contact problems
POSTER PRESENTATION Algeria Accepted
First-principles investigation of YCuSO, YCuSeO and YCuTe compounds based thermoelectric applications
Algeria Accepted
First-principles investigation of YCuSO, YCuSeO and YCuTe compounds based thermoelectric applications
POSTER PRESENTATION Algeria Accepted
Structural and Mechanical Characterization of Al-30wt%Ni Alloys Elaborated by the HF-Fusion Process
Algeria Accepted
Machining Stability of Aerospace Super Alloys on High Pressure Jet Assisted Cooling/Lubration (HPJAM) Conditions
ORAL PRESENTATION Turkey Accepted
First-principles study of the structural, electronic and elastic properties of LaxGd1-xN Alloys
POSTER PRESENTATION Algeria Accepted
COPPER OXIDE THIN FILMS BY THERMAL OXIDATION OF CU: EFFECT OF THE OXIDATION TIME
POSTER PRESENTATION Algeria Accepted
Flow and thermal performance analysis of nanofluid in annular tube filled with porous material using Euler-Lagrange approach
ORAL PRESENTATION Iran Accepted
Removal of Tannic Acid From Aqueous Solution by Cloud Point Extraction and Investigation of Surfactant Regeneration by Microemulsion Extraction
POSTER PRESENTATION Algeria Accepted
Natural Gas Thermodynamic Properties Calculation
POSTER PRESENTATION Egypt Accepted
Effect of boundary conditions on the vibrations of an asymmetric flexible monorotor with several disks
POSTER PRESENTATION Algeria Accepted
THERMAL SENSITIVITY OF SHRUBS BY TG AND DIELECTRIC SPECROSCOPY FOR THE MODELING OF FOREST FIRES
ORAL PRESENTATION Algeria Accepted
Heat transfer analysis of a solar thermoelectric generator cavity receiver
ORAL PRESENTATION Iran Accepted
STUDY OF THE SURFACE ROUGHNESS AND THE CUTTING FORCE IN THE TURNING OF THE POLYMER
POSTER PRESENTATION Algeria Accepted
Assessment of acetic acid effect on glycine phase transformation
ORAL PRESENTATION Turkey Accepted
Ab-initio investigation of structural, electronic and optical properties of the complex K2PtCl6-structure hydrides, ¬A2RhH6 (A = Ca, Sr).
POSTER PRESENTATION Algeria Accepted
Geometrical optimization of a phononic crystal for a better absolute band gap
POSTER PRESENTATION Turkey Accepted
Coupling heat transfer of radiation and natural convection in a square cavity containing absorbing emitting media
POSTER PRESENTATION Turkey Accepted
Optimization of Underactuated Finger Mechanism
ORAL PRESENTATION Turkey Accepted
POLYPYRROLE COATED PAPER SUBSTRATE DECORATED WİTH SİLVER NANOPARTİCLES.
POSTER PRESENTATION Saint Vincent & Grenadines Accepted
Selection of Suitable Renewable Energy Technologies (RETs) for Sindh, Pakistan by Using Analytical Hierarchy Process (AHP)
ORAL PRESENTATION Pakistan Accepted
Energy Audits and Recovery in the Production of Industrial Bread and Pastry
ORAL PRESENTATION Iran Accepted
Closed Loop Control of a Single Link Flexible Manipulator with Strain Feedback
ORAL PRESENTATION Turkey Accepted
MAINTENANCE PROCEDURE OF SCREW AIR COMPRESSOR OF PHASE ONE IN SOUTH PARS GAS COMPLEX
ORAL PRESENTATION Iran Accepted
FABRICATION AND CHARACTERIZATION OF Al2O3-CeO2 COATING ON TA6V FOR AEROSPACE APPLICATIONS
POSTER PRESENTATION Algeria Accepted
Assessing CO2 Mitigation Options for Pakistan – Application of TIMES Energy Model
ORAL PRESENTATION Pakistan Accepted
Zr-Based Metallic Glass Matrix Composites Study
POSTER PRESENTATION Algeria Accepted
Effect of annealing and quenching temperature on erosion behavior of poly(methylmethacrylate) for optical transmittance efficiency
POSTER PRESENTATION Laos Accepted
AB-INITIO CALCULATIONS OF PHONON AND THERMODYNAMIC PROPERTIES OF AgFeS2 TETRAGONAL STRUCTURE
POSTER PRESENTATION Algeria Accepted
CFD MODELING OF WATER FLOW BOILING WITH THE CONSIDERATION OF BUBBLE DYNAMICS AND ITS EFFECTS ON HEAT TRANSFER PREDICTION
ORAL PRESENTATION Iran Accepted
DOPED C12A7 THIN FILMS AS TRANSPARENT WINDOWS IN PHOTOVOLTAIC SOLAR CELLS
POSTER PRESENTATION Algeria Accepted
Co-existance of 4 types of synchronization in 4-D hyperchaotic dynamical systems
POSTER PRESENTATION Turkey Accepted
CFD Modeling of Water Flow Boiling with the Consideration of Bubble Dynamics and its Effects on Heat Transfer Prediction
ORAL PRESENTATION Accepted
Characterization of the alloy cupronickel After sea water use
POSTER PRESENTATION Algeria Accepted
Philosophical & social aspects of thermodynamics
ORAL PRESENTATION West Bank Accepted
PLATE BENDING WITH STRAIN BASED MINDLIN TRIANGULAR FINITE ELEMENT
ORAL PRESENTATION Algeria Accepted
NUMERICAL ANALYSIS OF THE INTERACTION OF GESOSYNTHETIC REINFORCED SOIL WALLS UNDER DYNAMIC LOADING
ORAL PRESENTATION Algeria Accepted
Experimental study of the 40CMD8 molding steel with indexable insert drill using response surface method and neural network
ORAL PRESENTATION Tunisia Accepted
Changing sign solution of Paneitz Branson type equation
POSTER PRESENTATION Turkey Accepted
First-principle study on the structural and elastic properties of AgFeS2 compound under different pressures
POSTER PRESENTATION Algeria Accepted
MECHANICAL PROPERTIES OF THE INTERMETALLIC COMPOUND BaSn2, FIRST PRINCIPAL STUDY
POSTER PRESENTATION Algeria Accepted
Trap Effect in Metal-Semi Coductor Fild Effect Transistor
POSTER PRESENTATION Algeria Accepted
Three-dimensional study of fluid dynamic and heat transfer performance in circular pipe with CuO/ethylene glycol-water nanofluid
POSTER PRESENTATION Algeria Accepted
Dynamic Amplification of an Orthotropic, Mul-ti-Span Bridge Deck under Moving Trucks
POSTER PRESENTATION Turkey Accepted
X-ray Diffraction Study of Ordering in the ternary Ti-Al-C lightweight metallic alloys elaborate by high frequency HF
POSTER PRESENTATION Algeria Accepted
Development and characterization of porcelain
POSTER PRESENTATION Algeria Accepted
Mixed Convection Nanofluid Flow in horizontal Ducts
POSTER PRESENTATION Algeria Accepted
Feasibility Study of Using New Tech Vehicles on the World’s Environment and Petroleum Consumption
ORAL PRESENTATION Jordan Accepted
Natural Convection heat transfer from Extended Surfaces on Vertical Base
ORAL PRESENTATION Jordan Accepted
A STUDY ON the PREDICTION of FAILURE in ADHESIVELY BONDED JOINTS
ORAL PRESENTATION Turkey Accepted
Thermal spraying of Al-x% Zn powders mechanically milled for corrosion protection
ORAL PRESENTATION Anguilla Accepted
Influence of the cellulosic and basic fluxes of the electrode on the micro-hardness and the microstructures during the smaw welding of a pipeline.
POSTER PRESENTATION Algeria Accepted
Ab-initio study of structural, mechanical and hydrogen storage properties in Rares Earth compounds RENi4Mg (RE: Y and La)
ORAL PRESENTATION Algeria Accepted
Energy performance assessment and energy optimization in semi humid and temperate areas buildings
POSTER PRESENTATION Iran Accepted
CHARACTERIZATION OF PLASTICIZED POLYLACTIC ACID/POLYCAPROLACTONE BLENDS WITH PLASTICIZERS
POSTER PRESENTATION Turkey Accepted
Development and characterization of Hydroxyapatite for bone use.
POSTER PRESENTATION Algeria Accepted
FAULT DİAGNOSİS OF ROTATİNG MACHİNERY BASED ON VİBRATİON SİGNAL ANALYSİS
ORAL PRESENTATION Algeria Accepted
STUDY OF THE MECHANISM OF DEGRADATION OF REFRACTORY COATINGS IN MgO-C IN CASTING LADLES
POSTER PRESENTATION Algeria Accepted
HEAT TRANSFER CHARACTERISTICS OF NANOFLUIDS IN MICRO-SCALE: A REVIEW
ORAL PRESENTATION Turkey Accepted
PERFORMANCE AND EFFICIENCY COMPARISON OF SEVERAL DIFFERENT INTAKE DESIGNS FOR A FSAE RACE CAR
ORAL PRESENTATION Turkey Accepted
Study of the influence of electrochemical etching parameters on optical properties of prepared porous silicon layers
POSTER PRESENTATION Algeria Accepted
Photocatalytic efficiency of Bi doped ZnO under visible light. Effect of Zn/Bi molar ratio
POSTER PRESENTATION Algeria Accepted
TiC/Cr23C6 Composite Coating on 304 Stainless Steel and Its Tribological Properties Investigation
ORAL PRESENTATION Turkey Accepted
Diagnosis and detection of the defects in the bearings of the revolving machines
POSTER PRESENTATION Algeria Accepted
Effect of Zn/Bi ratio in Bi-ZnO mixed oxide catalysts prepared from hydrotalcite-like precursors on photo-catalytic decomposition of organic pollution
POSTER PRESENTATION Algeria Accepted
ACOUSTIC EMISSION ANALYSIS IN WOVEN COMPOSITE BOLTED ASSEMBLY
ORAL PRESENTATION Algeria Accepted
APPLICATION OF PCM IN THERMAL ENGINEERING: A REVIEW
ORAL PRESENTATION Turkey Accepted
Study of Fatigue behavior of welded material in X70
POSTER PRESENTATION Algeria Accepted
Pin-on-ring wear of sintered bronze under pressure
POSTER PRESENTATION Algeria Accepted
First principles study on structural, electronic and optical properties of 3d transition metals-substituted CuGaSe2
POSTER PRESENTATION Algeria Accepted
Photo-degradation of water-organic contaminants and bacteria with safe sensitized TiO2 and ZnO nanoparticles: a green sustainable method for water purification
ORAL PRESENTATION Jordan Accepted
Algeria Accepted
Complete mineralization of aqueous gram negative bacteria and their organic content with direct solar light using naked and natural dye-sensitized ZnO nanoparticles.
ORAL PRESENTATION Jordan Accepted
Tribological performances of 13Cr5Ni2Mo Super-Martensitic Stainless Steel
POSTER PRESENTATION Algeria Accepted
CORROSION AND BIOCOMPATIBILITY OF PVD ZrN COATINGS FOR BIOMEDICAL APPLICATIONS
POSTER PRESENTATION Algeria Accepted
Control of Quarter Car Model by Co-Simulation with Adams and Matlab
ORAL PRESENTATION Turkey Accepted
Development of A Sit-to-Stand Orthosis Powered Via an Electric Motor and Pulling Cable
POSTER PRESENTATION Iran Accepted
: Characterization of a porous bronze copper-tin
POSTER PRESENTATION Algeria Accepted
Dynamic analysis of an annular plate resting on the surface of elastic half-space with distributive properties
POSTER PRESENTATION Algeria Accepted
Detailed Modeling of a Piezo Actuated Common Rail Injector
ORAL PRESENTATION Turkey Accepted
INTER-COMPARISON OF SOLAR RADIATION FROM DIFFERENT SOURCES: CASE OF SOME ALGERIAN SITES
ORAL PRESENTATION Algeria Accepted
Hydrogen Extracted from Non-Conventional Resource used for Internal Combustion Engine
ORAL PRESENTATION India Accepted
polypyrrole coated paper substrate decorated with silver nanoparticles
POSTER PRESENTATION Saint Vincent & Grenadines Accepted
Friction and Wear of Piston Ring/Cylinder Liner bench tests under Nano-lubrication
ORAL PRESENTATION India Accepted
WORLD’S FİRST PRODUCTİON-READY VCR ENGİNE BY INFİNİTİ.
POSTER PRESENTATION India Accepted
JOINING OF 2XXX AND 7XXX ALUMINUM ALLOYS WITH FRICTION STIR WELDING
ORAL PRESENTATION Turkey Accepted
Investigation on wind energy for grid connection in Bangladesh: Case study
ORAL PRESENTATION Iraq Accepted
Effect of heat treatment on wear behavior of forged steel balls
POSTER PRESENTATION Algeria Accepted
A STATISTICAL ANALYSIS FOR ALUMINUM ALLOYS JOINED WITH FRICTION STIR WELDING
ORAL PRESENTATION Turkey Accepted
Estimated lifetime in an HDPE pipe with a semi-elliptical defect under internal pressure.
POSTER PRESENTATION Algeria Accepted
STUDY OF THE GRAY CAST IRON CORROSION AFTER DEPOSITION OF THE MOLYBDENUM BY THERMAL SPRAYING
POSTER PRESENTATION Algeria Accepted
TEMPERATURE PROFILE IN MATERIAL WITHOUT AND WITH DEFECT
POSTER PRESENTATION Algeria Accepted
Model of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts
POSTER PRESENTATION Afghanistan Accepted
Influence of cutting conditions on white layers thickness using response surface method
ORAL PRESENTATION Tunisia Accepted
DRY WEAR TEST STUDY OF SUPERMARTENSITIC STAINLESS STEEL 13Cr5Ni2Mo FOR OIL AND GAS APPLICATION
POSTER PRESENTATION Algeria Accepted
Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods
POSTER PRESENTATION Afghanistan Accepted
Quenching : an improvement factor of C18 steel machinability in drilling
POSTER PRESENTATION Algeria Accepted
An Investigation of Water Heating Process in a Paraboloid Solar Collector
ORAL PRESENTATION Turkey Accepted
Effect of Temperature Disturbance on the Phonon Transport Characteristics in a Curved Silicon Film
ORAL PRESENTATION Saudi Arabia Accepted
Influence of heating on metal chalcogenide film electrodes prepared by combined electrochemical & chemical bath depositions
ORAL PRESENTATION West Bank Accepted
APPROXIMATE MODEL FOR PREDICTING STATIC RECRYSTALLIZATION OF FERRITIC STAINLESS STEEL TYPE 430
POSTER PRESENTATION Algeria Accepted
Effect of plastic deformation on tribological behavior of 13Cr stainless steel for oil and gas application
POSTER PRESENTATION Algeria Accepted
EFFECTS OF LITHIUM INTERCALATION ON STRUCTURAL, ELECTRONIC AND OPTICAL PROPERTIES OF WO3: A FIRST PRINCIPLES INVESTIGATION
POSTER PRESENTATION Algeria Accepted
Influence of manufacturing process on wear resistance of grinding balls
POSTER PRESENTATION Algeria Accepted
Presentation of an Efficient Membrane Finite Element Compared to FEAP Element
ORAL PRESENTATION Algeria Accepted
Elastic analyses of the Pipeline API X65 Repaired with Composite Overwrap
ORAL PRESENTATION Algeria Accepted
Mechanical and structural properties of thickness on V-C-N films deposited by cathodic magnetron sputtering system
POSTER PRESENTATION Algeria Accepted
Numerical study of quenching heat treatment: Influence of the cooling modes on the hardness
POSTER PRESENTATION Algeria Accepted
COMPARATIVE STUDY OF DRY CELL AND WET CELL FOR THE HHO GAS GENERATION AS A SUPPLEMENT FUEL FOR I.C. ENGINE.
VIRTUAL PRESENTATION Pakistan Accepted
Force-based vibration control of a frame structure
ORAL PRESENTATION Turkey Accepted
Passive vibration suppression of a single-link flexible manipulator
ORAL PRESENTATION Turkey Accepted
HEAT TRANSFER ANALYSIS OF REFRIGERATION SYSTEM WITH MINICHANNEL AND CONVENTIONAL CONDENSER USING ALTERNATIVE REFRIGERANTS
ORAL PRESENTATION India Accepted
A Numerical Examination of Ambler Method Characterizing the Centrifugal Sedimentation
ORAL PRESENTATION Turkey Accepted
STABILIZATION OF ALKALINE PHOSPHATASE BY CHEMICAL MODIFICATION OF CARBOXYMETHYLCELLULOSE
POSTER PRESENTATION Turkey Accepted
DFT calculations of structural, and mechanical properties of C15, C14 and C36 Laves phases in YM2(M:Mn, Fe, Co).
POSTER PRESENTATION Algeria Accepted
Determination of physical properties of nanofluids
ORAL PRESENTATION Turkey Accepted
QUALITY MANAGEMENT AND SAVINGS ESTIMATION OF REGASIFIED LIQUIFIED NATURAL GAS (RLNG) USING NITROGEN BLENDING TECHNIQUE
ORAL PRESENTATION Pakistan Accepted
Flow Boiling Characteristics in Microchannels
ORAL PRESENTATION Turkey Accepted
ABSORPTION CHILLER – A TECHNOLGY OF COOLING AND HEATING WITH ENERGY SAVING AND ENVIROMENT FRIENDLY
ORAL PRESENTATION USA (United States Of America) Accepted
Mathematical modeling of proton exchange membrane fuel cell
POSTER PRESENTATION Iran Accepted
Power generation and emission performance of syngas generated from biomass
ORAL PRESENTATION Turkey Accepted
Performance evaluation of a petrol station queuing system
ORAL PRESENTATION Iran Accepted
Life cycle management of cutting tools
ORAL PRESENTATION Turkey Accepted
Influence of solar energy on the energy efficiency
POSTER PRESENTATION Algeria Accepted
Thermo-structural fatigue analysis for heat exchangers
ORAL PRESENTATION Turkey Accepted
Experimental study on rheological behavior of non-Newtonian nano-coolant for cooling system applications
POSTER PRESENTATION Algeria -
Numerical simulation of active track tensioning system for vehicles
POSTER PRESENTATION Algeria -
Emissions And Performance Of A Single Cylinder Cfr Cetane Engine Using Biodiesel Water Emulsion
POSTER PRESENTATION Turkey Accepted
An Experimental Investigation of Ethanol-Diesel Blends on Performance and Exhaust Emissions of Diesel Engines
ORAL PRESENTATION Turkey Accepted
Effect of hydrogen and oxygen addition as a mixture on emissions and performance characteristics of a gasoline engine
ORAL PRESENTATION Turkey Accepted